Carbon steel, cast iron, centrifugally cast pipe, certificate of compliance, certified material test report, chamfering

Today Piping & Fabrication almost can't do the post because there is some problem with connection also with the PC, so I decide to bring the modem to other computer and start to post about Carbon steel, cast iron, centrifugally cast pipe, certificate of compliance, certified material test report, chamfering which all this thing will be explaining as simple as can.

Carbon Steel. 

carbon steel

A steel which owes its distinctive properties chiefly to the carbon (as distinguished from the other elements) which it contains. Steel is considered to be carbon steel when no minimum content is specified or required for aluminum,
boron, chromium, cobalt, columbium, molybdenum, nickel, titanium, tungsten, vanadium, or zirconium or for any other element added to obtain a desired alloying effect; when the specified minimum for copper does not exceed 0.40 percent; or when the maximum content specified for any of the following elements does not exceed the percentages noted: manganese, 1.65 percent; silicon, 0.60 percent; copper, 0.60 percent.2

Cast Iron. 

cast iron

A generic term for the family of high carbon-silicon-iron casting alloys including gray, white, malleable, and ductile iron.

Centrifugally Cast Pipe. 

centrifugally cast pipe

Pipe formed from the solidification of molten metal in a rotating mold. Both metal and sand molds are used. After casting, if required the pipe is machined, to sound metal, on the internal and external diameters to the surface roughness and dimensional requirements of the applicable material specification.

Certificate of Compliance. 

A written statement that the materials, equipment, or services are in accordance with the specified requirements. It may have to be supported by documented evidence.

Certified Material Test Report (CMTR). 

A document attesting that the material is in accordance with specified requirements, including the actual results of all required chemical analyses, tests, and examinations.

Chamfering. 

chamfering

The preparation of a contour, other than for a square groove weld, on the edge of a member for welding.

I hope all of this article will be useful to everyone who visit this blog and once again, thanks to everyone who already visiting this blog.