HEAT EXCHANGE INSTITUTE, HYDRAULIC INSTITUTE ON PIPING SYSTEM

After taken care all the documentation, and that's really takes a lot of times, finally I can have some rest and take a lunch for a while. When I waiting for the food comes, so I post this Piping & Fabrication blog first just to make this blog is more useful to all of us.

HEAT EXCHANGE INSTITUTE
The Heat Exchange Institute (HEI) publishes voluntary standards developed to express the consensus of member companies concerned with the fabrication of heat exchangers and similar equipment. The following are typical of the standards published by this institute:
HE14     Method and Procedure for the Determination of Dissolved Oxygen
HE15     Standards forClosed Feedwater Heaters
HE17     Standards for Direct Contact Barometric and Low Level Condensers
HE18     Standard for Power Plant Heat Exchangers
HE18A     Standards for Steam Jet Vacuum Systems
HEI10     Standards for Steam Surface Condensers, 8th Edition

HYDRAULIC INSTITUTE
The following is the list of the Hydraulic Institute (HI) publications:
Hydraulic Institute Standards, 1994 Edition
ANSI/HI 1.1-1.5     Centrifugal Pumps
ANSI/HI 1.6     Centrifugal Pump Test
ANSI/HI 5.1-5.6     Sealless Centrifugal Pumps
ANSI/HI 2.1-2.5     Vertical Pumps
ANSI/HI 2.6     Vertical Pump Test
ANSI/HI 3.1-3.5     Rotary Pumps
ANSI/HI 3.6     Rotary Pump Test
ANSI/HI 4.1-4.6     Sealless Rotary Pumps
ANSI/HI 6.1-6.5     Reciprocating Power Pumps
ANSI/HI 6.6     Reciprocating Pump Test
ANSI/HI 7.1-7.5     Controlled Volume Pumps
ANSI/HI 8.1-8.5     Direct Acting (Steam) Pumps
ANSI/HI 9.1-9.5     Pumps General Guidelines
Engineering Data Book, 2nd Edition (1990)
The information previously contained in the Pipe FrictionManual has been incorporated into the Engineering Data Book; the Pipe Friction Manual is no longer available.